- Brands:
- Product Code:
- Stock:
- ETL Systems
- SRY-ODU201
- In Stock
Overview
Model SRY-ODU201 RF over Fibre outdoor unit (ODU). The StingRay RF over Fibre Outdoor unit (ODU) is a robust weatherproof (IP65 rated) enclosure which has been designed to be wall or post mounted close to the antenna. It can accommodate up to 10 Transmit or Receive 200 series StingRay Fibre modules. There are a number of options available to customise the StingRay ODU, please see below. The StingRay RF over Fibre modules are available in a variety of impedances and connector types.
Download Catalogue
GENERAL SPECIFICATIONS
- Capacity
- Up to 10 2xx series modules of SMA, BNC or F-Type, N-Types not available on modules, may be used on ODU gland plate
- RF Connector Options (As defined on the modules)
- As defined in the modules Lightning arrestors should be used where appropriate
- Dimensions
- 407 x 356 x 254 mm Wall mounting as standard
- Local Control (Optional)
- LCD and Keypad Optional front panel mounted
- Remote Control & Monitoring
- Ethernet (RJ45) Port, 10BaseT/100BaseTx or optical, including ETL TCP/IP protocol, SNMP & Built in web server Optional optical Ethernet connection 1310 nm, 10 km reach bidirectional over two single mode optical fibres
- Module Features Monitored
- Temperature, RF power & optical power Refer to module spec for monitored features
Key Features
• IP65 rated Weatherproof enclosure can house up to 10 single or dual RX or TX 200 series modules
• LNB powering 13/18V & 22KHz tone (provided on TX modules)
• Reliability from dual redundant hot-swap fibre modules, power supplies & CPU
• Alarm to notify if door is left open
• Local control & monitoring via local control unit push buttons & display (O)
• Cable Options: RF patch coax cables (O) - Optical patch cables (O) - Optical pigtails (O) - Ethernet cables (O) - EMC cable gland (O)
• Remote control & monitoring via RJ45 Ethernet port with SNMP & web browser interface. Ethernet options: - Copper Ethernet interface - Single optical Ethernet interface (O) - Ethernet switch (O)
• Thermostat options for operation below -20°C to -60°C & humidity detection (O)
• Sunshade to protect from direct sunlight / solar loading (O)
• RF patch panel allow incoming RF cables to be connected to the panel & then patch up to modules (O)
• Fibre management tray & patch panel for termination of the incoming fibre cable & slack cable storage (O)
* (O): Optional
RF CHARACTERISTIC
Key Features
• IP65 rated Weatherproof enclosure can house up to 10 single or dual RX or TX 200 series modules
• LNB powering 13/18V & 22KHz tone (provided on TX modules)
• Reliability from dual redundant hot-swap fibre modules, power supplies & CPU
• Alarm to notify if door is left open
• Local control & monitoring via local control unit push buttons & display (O)
• Cable Options: RF patch coax cables (O) - Optical patch cables (O) - Optical pigtails (O) - Ethernet cables (O) - EMC cable gland (O)
• Remote control & monitoring via RJ45 Ethernet port with SNMP & web browser interface. Ethernet options: - Copper Ethernet interface - Single optical Ethernet interface (O) - Ethernet switch (O)
• Thermostat options for operation below -20°C to -60°C & humidity detection (O)
• Sunshade to protect from direct sunlight / solar loading (O)
• RF patch panel allow incoming RF cables to be connected to the panel & then patch up to modules (O)
• Fibre management tray & patch panel for termination of the incoming fibre cable & slack cable storage (O)
* (O): Optional
Compatibility
ENVIRONMENTAL SPECIFICATIONS
- Operating temperature (see note 5,6&7)
- -20 to +55˚C 10 feeds no LNB power, single TX & -40 and –60˚C operation optional / -20 to +55˚C 8 feeds with LNB power, single TX LNB power less than 250 mA / 20 to +45˚C 12 feeds with LNB power, single TX LNB power less than 250 mA / -20 to +40˚C 20 feeds with LNB power, dual TX LNB power less than 250 mA
- Location
- Outdoor or indoor use
- Storage temperature
- -40 to +80˚C
- Humidity
- Internally 20-90% RH, non-condensing Internal humidity sensor
- Altitude
- 10,000 ft / 3,000 m (above mean sea level)
Key Features
• IP65 rated Weatherproof enclosure can house up to 10 single or dual RX or TX 200 series modules
• LNB powering 13/18V & 22KHz tone (provided on TX modules)
• Reliability from dual redundant hot-swap fibre modules, power supplies & CPU
• Alarm to notify if door is left open
• Local control & monitoring via local control unit push buttons & display (O)
• Cable Options: RF patch coax cables (O) - Optical patch cables (O) - Optical pigtails (O) - Ethernet cables (O) - EMC cable gland (O)
• Remote control & monitoring via RJ45 Ethernet port with SNMP & web browser interface. Ethernet options: - Copper Ethernet interface - Single optical Ethernet interface (O) - Ethernet switch (O)
• Thermostat options for operation below -20°C to -60°C & humidity detection (O)
• Sunshade to protect from direct sunlight / solar loading (O)
• RF patch panel allow incoming RF cables to be connected to the panel & then patch up to modules (O)
• Fibre management tray & patch panel for termination of the incoming fibre cable & slack cable storage (O)
